1 6

411 Decals Aftermarket Replacement for Yamaha 150 Four Stroke (2002-2006) Gray-White Outboard Decal (Sticker) Set

411 Decals Aftermarket Replacement for Yamaha 150 Four Stroke (2002-2006) Gray-White Outboard Decal (Sticker) Set

$79.95
$79.95
Sale Sold out
Shipping calculated at checkout.

411 Decals Compatible Replacement for Yamaha Outboard Decal (Sticker) Set

yamaha outboard decal set

Aftermarket replacement decals set made to fit Yamaha Outboard. Digitally printed on polymeric foil and laminated. Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal, this is reproduction, similar to the original. May differ from original in color, size or shape. Logos are copyrighted by their respective owners; Made in EU.

yamaha Instructions

SURFACE PREPARATIONS

Fiberglass

Clean surface with acetone. After solvent has evaporated wipe down area with soapy water (a few drops of hand dishwashing liquid mixed with water in a spray bottle).

Plastics and Glass

Wipe surface clean with a window cleaner. Remove any tape or glue residue with a single edge razor blade or plastic scraper.

Painted Metals and Base Metals

Clean surfaces with a solvent such as Lacquer Thinner. Dry the surface with a lint free cloth before the solvent evaporates and re-clean with a soapy water solution before applying graphic.

All surfaces must be

  • cleaned of wax
  • cleaned of dirt
  • cleaned of any old adhesive

APPLICATION INSTRUCTIONS

Step 1 You will need masking tape, spray bottle, dish washing liquid, and a tape measure.
Step 2 Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.
Step 3 With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.
Step 4 Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape.
Step 5 While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.
Step 6 Use the an squeegee or credit card to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air and water from under the Graphics.
Step 7 Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees 30 minutes, 70 degrees 3 hours, 50 degrees 4 to 6 hours. The Graphics MUST dry prior to the next step. 60, 70, 80 degrees are recommended temperatures for post installation.
Step 8 Slowly peel back the premask translucent application tape, the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics, repeat squeegee process. LET DRY.
Step 9 Now check for any bubbles. If you and any, place a small piece of premask tape over the area, squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over time.
  • Aftermarket replacement decal set
  • Digitally printed on polymeric foil and laminated
  • Resistant to heat, cold, moisture, oil, UV rays
  • This is not an OEM decal - this is reproduction, similar to the original
  • May differ from original in color, size or shape
› See more product details
Brand 411 DECALS
Cartoon Character Yamaha
Special Feature Water Resistant
Number of Pieces 11
Age Range (Description) Adult
Reusability Single Use
Unit Count 1.0 Count
Indoor/Outdoor Usage Outdoor
Finish Type Laminated
Number of Items 1
View full details